Office Refresh Procurement Checklist: 6 Checks Before I Sign Off on Any Order
-
When this checklist actually applies
-
Step 1: Match the spec before you compare the price
-
Step 2: Ask what's NOT included
-
Step 3: Get the fabrication and install quote in writing
-
Step 4: Don't let small items skip the process
-
Step 5: Separate "branded" from "commodity" purchases
-
Step 6: Verify invoicing before you commit
-
Common mistakes I still see
In the fall of 2024, I handled a partial office refresh for our 180-person company—three restrooms, the breakroom, and the two main exterior doors. The total came to roughly $47,000 across six suppliers. Not huge, but enough that finance watched every line and asked me to justify each invoice.
I've been running procurement here since 2021. Before that I was coordinating facilities requests, which meant I knew what people wanted but not what it cost. Now I know both, and I have the scar tissue to prove it. This is the checklist I run before I place any order for building materials, fixtures, or branded items. Six steps. Nothing fancy, but it has saved me from at least three expensive mistakes.
When this checklist actually applies
Use it any time you're buying across categories—a plumbing fixture here, a finish material there, a batch of branded staff merch for an event. The mix is what makes it tricky. When you're sourcing a Kohler shower diverter valve and a box of door weather stripping in the same week, the pricing logic is completely different, and that's where things go wrong.
If you're buying one thing from one vendor, you can probably skip half of this. The checklist earns its keep when the request spans categories and you're the one reconciling the whole invoice at the end.
Step 1: Match the spec before you compare the price
Most buyers focus on the unit price and completely miss compatibility. I learned this the hard way on the shower diverter valves.
We had three aging Kohler shower systems in the west restroom. I pulled the model numbers off the trim plates and assumed any Kohler diverter would fit. It won't—or rather, not reliably. Kohler has used several valve body generations, and the trim kits and diverters are matched to specific rough-in valves. I almost ordered six of the wrong cartridge style, which honestly would have been a $900 mistake plus a very unhappy facilities crew and a missed deadline.
The question everyone asks is "what's your best price?" The question they should ask is "what's the exact model and generation, and what fits it?" For Kohler parts—or any brand with a long product history—get the model number off the existing unit, confirm compatibility in writing, and only then start negotiating. This one check has saved me more money than any price comparison I've ever done (and I've done plenty).
Step 2: Ask what's NOT included
This is the step that separates a clean quote from a cheap one. I've learned—slowly, sometimes painfully—to ask "what's not included" before I ask "what's the price."
On the quartz countertop for our breakroom, we were quoted around $65 per square foot for the slab. Sounds reasonable, right? But the slab price is not the installed price. Cutting, edge fabrication, sink cutouts, and installation added another 40-50% to the invoice. The vendor who lists every fee upfront—even if the total looks higher—usually costs less in the end. The one with the suspiciously clean number is the one that surprises you at the end of the project.
I'd rather pay $85 a foot with everything included than $65 a foot and discover $1,100 in fabrication and install charges two weeks later. The first number lets me budget. The second number makes me look unprepared to my VP.
This isn't me being cynical about every vendor. Most of them aren't trying to hide anything. It's just that their standard quote format was designed for a different customer, and the extras live in a separate document. You have to ask.
Step 3: Get the fabrication and install quote in writing
For stone surfaces, "how much is quartz countertops" is really two questions: the material price and the installed price. Publicly listed material prices (as of early 2025) for mid-grade quartz run roughly $50-80 per square foot, before fabrication. Installed prices typically land in the $80-120 range, depending on edge profile, cutouts, and who's doing the templating.
Here's the part people skip: ask whether the template visit is included in the fabrication fee or billed separately. On our project, one vendor quoted a flat fabrication fee and then added a $150 templating charge on the invoice. The next vendor built it into the number. Same total, wildly different experience when you're explaining it to finance. Get it in writing, line by line, and make the vendor confirm the number includes templating, delivery, and the install crew.
The upside of the higher, all-inclusive quote was predictability. The risk of the cheaper one was a surprise charge right when I needed to close the PO. I've learned to pay a little more for the version of the truth I can plan around.
Step 4: Don't let small items skip the process
Door weather stripping is where I got complacent. It's cheap, it's simple, and it feels like it doesn't deserve the full checklist. That's exactly the trap.
Our exterior doors had worn seals, and I ordered replacement stripping by the roll—around $8-15 per roll for standard adhesive-backed foam, from what I remember (I might be misremembering the exact unit price, but it was in that range). The problem wasn't the price. It was that the first order had a minimum quantity that doubled what we needed, and the adhesive wasn't rated for exterior use. We installed it in November. It failed by March. The replacement cost us more than the original order, and I got to explain why the door was whistling again.
The 'local is faster for small orders' thinking also got me here—that comes from an era before most B2B suppliers had online ordering. Today, a well-organized online vendor can often beat a disorganized local one on both price and lead time, even for small stuff. But you still have to check the spec.
Even low-cost items need the three-question check: compatible spec, included costs, and correct rating for the application. Cheap items fail cheaply but annoy loudly.
Step 5: Separate "branded" from "commodity" purchases
Not everything in a refresh is a fixture. We also ordered branded staff caps for a company event—Boston scally caps, which ran around $30-40 each depending on embroidery and quantity. That's a completely different purchase category from a Kohler bath accessory or a faucet.
Branded items rarely have hidden fabrication costs, but they do have setup and minimums. Embroidery setup, digitizing fees, and minimum run sizes can add 10-20% if you're ordering small quantities. Commodity hardware (weather stripping, fasteners, basic trim) is the opposite: low setup, but shipping and minimum order quantities can wreck a small order.
I keep them in separate purchase requests now. Mixing a $1,200 fixture order with a $400 branded cap order only makes both harder to track, and it makes it harder to compare vendors on a like-for-like basis. Kohler bath accessories, quartz, and hardware are performance purchases. Branded merch is a marketing expense with a different approval path. Treating them the same is how you end up with a purchase order nobody can categorize.
Step 6: Verify invoicing before you commit
This is the check I now run before anything else. In 2022, I found a great price on replacement parts from a new vendor—about $600 cheaper than our regular supplier. Ordered. They sent a handwritten receipt. Finance rejected the expense report, and I ate $600 out of the department budget.
Now I verify invoicing capability before placing any order. Can they issue a proper invoice with a tax ID and purchase order reference? Can they do net-30 if we need it? Will they send a PDF or just a scanned photo of a carbon copy? The vendor who can't answer those questions is not a bargain, no matter how good the price looks on the quote.
This is also where the transparency argument cuts both ways. If a vendor can't produce a clean, itemized invoice, I can't tell whether the price is actually transparent or just presented that way. A proper invoice is the proof that the quote meant something.
Common mistakes I still see
- Comparing slab price to installed price. Always normalize to the installed total before comparing. A $65 slab and an $85 installed number can be the same project, and one of them is lying to you.
- Assuming brand compatibility. Kohler parts in particular—check the generation and rough-in valve before you buy. Model numbers exist for a reason.
- Skipping the spec on cheap items. Weather stripping that's wrong for the application fails fast, and the replacement cost usually exceeds the original order.
- Mixing purchase categories. Keep fixtures, finishes, and branded goods on separate requests so you can compare and approve them properly.
- Ignoring invoice requirements. A low price with an unusable receipt is a net loss once finance gets involved.
None of this is glamorous. It's the stuff that keeps a refresh from turning into a finance reconciliation project in April. But every time I skip a step, I end up explaining it to someone with more authority than me. Better to run the checklist.